Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

feedback on woolson M/T jig
http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=31439		 Page 1 of 1
Author:  ernie [ Thu Mar 10, 2011 8:29 am ]
Post subject:  feedback on woolson M/T jig
Has anyone out there bought the woolson plans for the neck M/T jig and successfuly used one . I just looked at the robbie o/brien video and figured out how to make the mortise part of the jig. The neck male part tenon seems much more complicated especially with the built in angle adjuster . Your thoughts would be appreciated, working on my first OM steel string thanks
Author:  sjfoss [ Fri Mar 11, 2011 9:47 am ]
Post subject:  Re: feedback on woolson M/T jig
Ernie,

I have both built and used Mr. O'Brien's latest M/T jig. I've seen it used dozen's of times at RRCC (Red Rocks Comm. College where he teaches). It's design makes getting the correct neck angle very easy to do. It's slicker than deer guts on a doorknob. ;)

If you email Mr. O'Brien, He'll tell you how to get plans for making your own.

Steve
Author:  ernie [ Sat Mar 12, 2011 8:22 am ]
Post subject:  Re: feedback on woolson M/T jig
bliss Thanks steve. Did ityesterday aft. Great videos, and very slick indeed.
Author:  runamuck [ Sat Mar 12, 2011 1:03 pm ]
Post subject:  Re: feedback on woolson M/T jig
I bought a set of the plans and was surprised how incomplete they were.
Author:  James Orr [ Sat Mar 12, 2011 9:53 pm ]
Post subject:  Re: feedback on woolson M/T jig
runamuck wrote:
I bought a set of the plans and was surprised how incomplete they were.
Author:  Kim [ Sun Mar 13, 2011 12:04 am ]
Post subject:  Re: feedback on woolson M/T jig
.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/